http://www.tracopower.com page 1 of 3 dc/dc converters tes 5wi series, 5 watt features compact smd package 33.4 x 25.6 mm footprint ultra-wide 4:1 input voltage range i/o isolation 1500 vdc operating temp. range C40c to +71c short circuit protection input flter to meet en 55022, class a remote on/off high accuracy of pin co-planarity qualifed for leadfree refow solder process according ipc/jedec j-std-020d 3-year product warranty the tes-5wi series is a family of high performance 5w dc/dc-converter modules in a low profle smd package with compact dimensions. the 14 modules feature ultra- wide 4:1 input ranges with tightly regulated output voltage. high effciency allows an operating temperature range of C40 to +71c at full load. further features are built-in emi-flter to meet en 55022 class a without external components and remote on/off control. the products comply with ipc j-std-020d and are qualifed for high temperature lead-free refow solder process. order code input voltage output voltage output current max. effciency typ. tes 5-2410wi 3.3 vdc 120 0 ma 76 % tes 5-2411wi 5 vdc 1000 ma 80 % tes 5-2412wi 12 v d c 420 ma 83 % tes 5-2413wi 9 C 36 vdc 15 vd c 335 ma 83 % tes 5-2421wi (24 vdc nominal) 5 vdc 500 ma 80 % tes 5-2422wi 12 v d c 210 ma 83 % tes 5-2423wi 15 vd c 165 m a 83 % tes 5-4810wi 3.3 vdc 120 0 ma 76 % tes 5-4811wi 5 vdc 1000 ma 80 % tes 5-4812wi 12 v d c 420 ma 83 % tes 5-4813wi 18 C 75 vdc 15 vd c 335 ma 83 % tes 5-4821wi (48 vdc nominal) 5 vdc 500 ma 80 % tes 5-4822wi 12 v d c 210 ma 83 % tes 5-4823wi 15 vd c 165 m a 83 % models ul 60950-1 pending
http://www.tracopower.com page 2 of 3 all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. dc/dc converters tes 5wi series 5 watt input specifications input current (full load) 24 v models: 250 ma typ. 48 v models: 125 ma typ. input current (no load) 24 v models: 20 ma typ. 48 v models: 10 ma typ. start-up voltage / under voltage shut down 24 v models: 9 vdc / 8 vdc typ. 48 v models: 18 vdc / 16 vdc typ surge voltage (1 sec. max.) 24 v models: 50 v max. 48 v models: 100 v max. reverse voltage protection 1.0 a max. reflected input ripple current 24 v models: 10 ma typ. 48 v models: 5 ma typ. input filter en 55022 class a, fcc part 15, level a output specifications voltage set accuracy 2 % regulation C input variation vin min. to vin max. 1.0 % max. C load variation 10 C 100 % single output models: 1.0 % max. dual output models balanced load: 3.0 % max. minimum load 10 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) temperature coefficient 0.02 %/c max. ripple and noise 85 mvpk-pk max. dynamic load response (25% load change) 6 % max. peak variation 500 s max. response time transient response (25% load step change) 200 s typ. current limitation >115 % of iout max. short circuit protection indefinite, automatic recovery capacitive load 3.3 & 5 vdc models: 2000 f 12 vdc models: 470 f 15 vdc models: 330 f 5 vdc models: 680 f 12 vdc models: 330 f 15 vdc models: 220 f remote on/off C on: 2.5 to 5.5 v or open circuit C off: C0.7 to 0.8 v or short circuit pin 3 and pin 1/2 C off idle current: 10 ma general specifications temperature ranges C operating C40c to +71c C case temperature +100c max. C storage C40c to +125c humidity (non condensing) 95 % rel h max. reliability, calculated mttf (mil-hdbk-217f, @+25c, ground benign) >1000000 h isolation voltage (60 sec.) C input/output 1500 vdc isolation capacitance C input/output 750 pf max. isolation resistance C input/output >1000 mohm switching frequency 340 khz typ. (frequency modulation pfm) safety standards ul 60950-1, iec/en 60950-1 safety approvals csa file no. 226037 http://directories.csa-international.org (entry pending)
page 3 of 3 outline dimensions pin single dual 1 remote on/off remote on/off 2 Cvin (gnd) Cvin (gnd) 3 Cvin (gnd) Cvin (gnd) 9 no con. common 10 no con. no con. 11 no con. Cvout 12 no con. no con. 13 no con. no con. 14 +vout +vout 15 no con. no con. 16 Cvout common 22 +vin (vcc) +vin (vcc) 23 +vin (vcc) +vin (vcc) 24 no con. no con. pin-out pin patterns: dc/dc converters tes 5wi series 5 watt rev. 03/11 specifcations can be changed any time without notice. 1 24 13 12 seating plane s detail a detail a 22.6 (0.81) 25.6 10.2 33.4 2.7 (0.11) 15.24 (0.6) 0.15 (0.006) 1.5 (0.06) 20.6 (1.31) (0.40) 0.4 (0.016) 2.54 (0.1) (0.89) (1.01) t op v iew 1.5 (0.06) 0.15 dimensions in [mm], () = inch tolerances 0.25 (0.02) pin pich tolerances 0.13 (0.005) 1.9 (0.059) 3.0 (0.12) 27.0 (1.06) 2.7 (0.11) 2 x 2.54 (2 x 0.1) 15.24 (0.6) 3 x 2.54 (3 x 0.1) physical specifications casing material non conductive plastic (ul 94v-0 rated) package weight 14 g (0.49 oz) lead-free reflow solder process as per j-std-020d.01 (to find at: www.jedec.org - free registration required) moisture sensivity level (msl) level 2 as per j-std-033b.01 (to find at: www.jedec.org - free registration required) washing process www.tracopower.com/products/smd- wash.pdf packaging www.tracopower.com / products / tes5wi -pack.pdf jenatschstrasse 1 ch-8002 zurich switzerland t el. +41 43 311 45 11 fax +41 43 311 45 45 info@traco.ch www .tracopower .com
|
